In development · no payment taken

Mounts for your 10-inch mini rack, printed for you, with the screws in the box

For home-labbers with a DeskPi RackMate or a similar 10-inch rack who don't own a 3D printer, or would rather not print. We're designing mounts for a named rack and a named device, and we'll fit-test each one on the real hardware before we sell it.

Computer render of a dark gray open-frame 1U rack tray: a front panel with a large window for the PC's front ports, rack ears with slotted screw holes, two side rails joined by a cross-braced floor, and two separate brackets at the back that carry the rails.
Design render of the open-frame 1U tray for a 1L mini PC. Prototype: not yet printed or fit-tested.

Sound familiar?

  • "10-inch" isn't one standard. Hole spacing differs by a millimeter or two between racks, and devices come out a few millimeters too wide or too long. The mount ends up drilled, dremeled or MacGyvered into place.
  • The hardware hunt. Too few screws in the box, cage nuts that crack printed holes, inserts you can't find locally, and listings that say "supply your own rack hardware".
  • Sag. A 1L mini PC hanging off two printed front ears, warm air coming out the back, and a tray that slowly droops.
  • No printer, or no time to print. A 10-inch part needs a big print bed and a long print, and then you still have to source the screws.

What we're building

  • Made for a named rack and device, not "universal". Each mount is designed for one rack model and one device, for example a 1L mini PC in a DeskPi RackMate T1.
  • Fit-tested before we sell it. The plan: print a sample, mount it on the real rack with the real device, and publish a list of the pairs we've tested. Nothing has been fit-tested yet.
  • Screws included. The rack screws and washers come in the box. On DeskPi racks the mount screws straight into the rack's own threaded holes: no cage nuts, no inserts.
  • Supported at the back, too. The design holds the device at the rear as well as the front, so two printed ears don't carry all the weight. Printed in PETG, which copes with warm air better than PLA.
  • Printed and shipped in the US. The plan is a US print farm shipping within the US, so US buyers pay no import fees. US only for now.

Where this stands

Done
A first 1U design: an open-frame tray for a 1L mini PC and a tray for two Raspberry Pi 5 boards, modeled from the manufacturers' published drawings and spec sheets.
Not yet
No samples printed. Nothing tested on a real rack.
Not set
Price and ship date. The list hears both before we take any order. Joining costs nothing and commits you to nothing.
Why the list
Your answers tell us which rack and device pairs to build and fit-test first.

Join the waitlist

Four quick questions, about a minute. Your answers tell us which mounts to build and fit-test first. Nothing to buy today.

We'll send one email to confirm. You're only on the list after you click the link in it.
Which 10-inch rack do you have? (required)
Which devices would you want to mount? (choose any)
Do you have a 3D printer? (required)

No payment, no card details. After you submit, check your inbox for the confirmation email.

Have a 3D printer? Print it yourself

Both mounts are free files on Printables: the 1L mini PC tray and the tray for two Raspberry Pi 5 boards, each with its rear brackets. They're first designs, not yet test-printed, so fit reports are very welcome. If you'd still rather get a printed kit, choose "I have one but would rather buy" in the form.

Questions

Will it fit my rack?

Not promised yet. We're starting with the DeskPi RackMate T0 and T1, and we'll only call a rack and device pair "fit-tested" after we've mounted it ourselves. Tell us your rack in the form.

How much will it cost?

The price isn't set. We'll email it to the list before taking any order. You can ignore that email or unsubscribe.

When will it ship?

There's no date yet. Samples have to be printed and fit-tested first.

Are you connected to DeskPi, Lenovo, Raspberry Pi or the other brands?

No. Product names are used only to say what a mount is designed for. We're an independent maker, not affiliated with or endorsed by any of them.

Does this page use cookies or trackers?

No. It sets no cookies and loads nothing from other sites. Apart from what any web host sees when it delivers a page, the only data that leaves your browser is the form, when you submit it. See the privacy notice.

Who's behind this?

Daniel Lazdin, a one-person business. Questions: minirackmounts@gmail.com.